Genetic characterization and improved genotyping of the dysferlin-deficient mouse strain Dysftm1Kcam

Background Mouse models of dysferlinopathies are valuable tools with which to investigate the pathomechanisms underlying these diseases and to test novel therapeutic strategies. One such mouse model is the Dysftm1Kcam strain, which was generated using a targeting vector to replace a 12-kb region of the dysferlin gene and which features a progressive muscular dystrophy. A prerequisite for successful animal studies using genetic mouse models is an accurate genotyping protocol. Unfortunately, the lack of robustness of currently available genotyping protocols for the Dysftm1Kcam mouse has prevented efficient colony management. Initial attempts to improve the genotyping protocol based on the published genomic structure failed. These difficulties led us to analyze the targeted locus of the dysferlin gene of the Dysftm1Kcam mouse in greater detail. Methods In this study we resequenced and analyzed the targeted locus of the Dysftm1Kcam mouse and developed a novel PCR protocol for genotyping. Results We found that instead of a deletion, the dysferlin locus in the Dysftm1Kcam mouse carries a targeted insertion. This genetic characterization enabled us to establish a reliable method for genotyping of the Dysftm1Kcam mouse, and thus has made efficient colony management possible. Conclusion Our work will make the Dysftm1Kcam mouse model more attractive for animal studies of dysferlinopathies. Electronic supplementary material The online version of this article (doi:10.1186/s13395-015-0057-3) contains supplementary material, which is available to authorized users.


Background
Mouse models of dysferlinopathies have been developed so that the pathomechanism responsible for the dysferlinopathies can be studied, and these strains are also expected to be valuable in testing novel therapeutic strategies. Among four distinct dysferlindeficient mouse models that have been published, two occur naturally [1,2] and two were generated by a DNA recombination strategy [3,1]. The first published targeted dysferlin-deficient mouse (Dysf tm1Kcam ) was generated using a targeting vector intended to replace a 12-kb region containing the four coding exons (51-54) of the dysf gene; this includes exon 54, which encodes the transmembrane domain [3]. Analysis using an anti-dysferlin antibody directed against the C-terminus indicated that homozygous Dysf tm1Kcam mice do not express dysferlin protein. Moreover, histological signs of muscular dystrophy are detectable by the age of 2 months, and the pathology progresses with age [3]. By the time mice are 8 months of age, the proximal muscles develop the pathological hallmarks of a muscular dystrophy (i.e., regenerating fibers, split fibers, myofiber necrosis with macrophage infiltration and muscle replacement by fatty tissue), and isolated muscle fibers from the homozygous Dysf tm1Kcam mice are defective for Ca 2+ -dependent repair of the sarcolemma [3]. The Dysf tm1Kcam mouse model has been used in several studies seeking to establish a better understanding of the pathomechanism of the dysferlinopathies [4][5][6][7][8][9].
We set out to establish a colony of the Dysf tm1Kcam mice in order to investigate new therapeutic strategies for dysferlinopathies. However, during heterozygous breeding of these mice, we encountered difficulties in genotyping the Dysf tm1Kcam progeny. When initial attempts to improve the genotyping protocol based on the published genomic structure failed, we genetically analyzed the targeted locus of the dysferlin gene of the Dysf tm1Kcam mouse in greater detail. In doing so, we discovered that instead of the predicted deletion, the mice harbored a targeted insertion that accounted for the difficulties in genotyping. In this study, we resequenced and characterized the targeted locus of the Dysf tm1Kcam mouse to facilitate its future use by our research groups and others. Moreover, we used smaller amplicons than those previously published, thereby reducing cycling times leading to a faster genotyping protocol.

Mice
The mouse strain B6.129-Dysf tm1Kcam /J (stock # 013149) was obtained from The Jackson Laboratory. Mice were maintained by breeding of heterozygotes in a conventional animal facility with a fixed light and dark cycle. All experiments involving animals were performed in accordance with the Swiss regulations and were approved by the veterinary commission of the Canton Basel-Stadt (Kantonales Veterinäramt BS; #2391).
For the PCR products in Fig. 1, the following primer pairs were used: The primers were designed based on the genomic sequence obtained from the UCSC Genome Browser (NCBI37/mm9 assembly, chr6:83958584-84166036).

Protein extraction and Western blotting
Mouse muscles (quadriceps) were frozen in liquid nitrogen and pulverized (with mortar and pestle) on dry ice and then resuspended in RIPA buffer supplemented with protease inhibitor cocktail tablets (Roche). The lysates were sonicated two times for 15 s, incubated on ice for 2 h, and then centrifuged at 15,000 rpm for 20 min at 4°C. Total protein levels in the lysates were determined using the BCA Protein Assay (Pierce). Proteins were separated on SDS polyacrylamide gel and blotted onto a nitrocellulose membrane. Membranes were blocked for 1 h in TBS containing 3 % BSA and 0.5 % Tween, and incubated for 16 h with the indicated antibody in the same buffer as above. Monoclonal antibodies against dysferlin were purchased from Abcam (Romeo I) and Vector Laboratories (NCL-Hamlet, clone Ham1/7B6), and that against α-actinin was from Sigma Aldrich. The membranes were washed with TBS containing 0.5 % Tween and incubated for 1 h with secondary antibody (HRP-conjugate goat anti-mouse IgG or HRPconjugated goat anti-rabbit IgG) in TBS containing 3 % BSA and 0.5 % Tween (1:10,000 dilution). Membranes were washed in TBS containing 0.5 % Tween and developed using the LumiGLO Chemiluminescent substrate system (KPL).

Improved genotyping PCR protocol
DNA was prepared by heating a mouse toe in 200 μl lysis Chelex-100 buffer (Biorad cat. # 142-1253) +5 μl Proteinase K (20 mg/ml) (Qiagen cat. # 19131) [11] at 55°C for 120-180 min under constant shaking (800-900 rpm), and then centrifuging (14,000 rpm) the mixture for 1 min to pellet the debris, boiling for 8 min at 100°C, and recentrifuging (14,000 rpm) for 8 min. For genotyping, 2 μl of a 1:10 dilution of the supernatant was used directly in the PCR. The genotyping protocol consists of a four-primer PCR. One primer pair identifies the wild-type allele (exon 48/intron 50) using the primer pair for_wt (5′-CAG GGG AAG CTA CAG ATG TGG ATT GA-3′) and rev_wt (5′-TTT CTG GTG GAC CCT ACT GCC ATC T-3′), producing an amplicon of 2043 bp. The second primer pair identifies the mutated allele (neomycin cassette) using primer pair neo_for (5′-AGG ATC TCC TGT CAT CTC ACC TTG CTC CTG-3′) and Fig. 1 Detection of the locus targeted for deletion in homozygous Dysf tm1Kcam mice. a Schematic drawing of the wild-type locus and the expected deletion. The arrows depict the two homologous arms used for targeted deletion. b Results of a genotyping PCR using DNA from toe biopsies of wild type, heterozygous mutant (Dysf tm1Kcam/+ ), and homozygous mutant (Dysf tm1Kcam/tm1Kcam ) mice, as well as a no template control (NTC). As expected, PCR to detect the targeting vector was negative for wild type mice, and positive for heterozygous and homozygous Dysf tm1Kcam mice. However, PCR to amplify the sequence encompassing exons 51-54, which had been targeted for deletion in generating the Dysf tm1Kcam line, was positive in all mice, suggesting that homologous recombination had failed to delete the targeted region

Results and discussion
Despite the recent development of an improved protocol for genotyping of the Dysf tm1Kcam mouse [12], the PCR remains challenging due to the large size of the amplicons (3904 and 4846 bp). In an attempt to make the genotyping more efficient and more reliable, we switched to one of the genotyping protocols suggested by the supplier of the mice (Jackson Lab). This protocol consists of two separate PCR amplifications and is designed to detect the presence of the neo cassette (targeting vector) in the dysferlin locus and the absence of exon 53 in mutant mice. Using this protocol and the primer set specific for the mutant genotype, we found (as expected) that a~300-bp amplicon (neomycine cassette) was produced from the genomic DNA of both heterozygous and homozygous mice, but not from that of wild-type mice (Fig. 1). The presence or absence of this amplicon was congruent with the genotypes. Unexpectedly, however, we were able to detect the presence of exons 51-54, which had been targeted for deletion (Fig. 1). This was the case for all genotypes, including what were thought to be homozygous knock-out mutants (Fig. 1). This revealed that the targeted region had not, in fact, been deleted in the Dysf tm1Kcam mice.
We therefore performed another set of PCR reactions (Fig. 2b), followed by sequencing, to characterize the site of insertion of the neomycin cassette within the dysferlin locus of the homozygous Dysf tm1Kcam mouse. Sequencing a) b) Fig. 2 Genomic structure of the targeted dysferlin locus in the Dysf tm1Kcam mice. a Schematic drawing of the locus analyzed by PCR and sequencing. b Schematic drawing of the sequenced region, with the four PCR products generated (covering overlapping genomic regions of the targeted dysferlin locus) shown on gel and schematically. Indicated in the drawing are the neo cassette, the inverted short arm harboring exon 55, and part of the TK cassette.
revealed that the genomic locus of the mutant mouse was indeed disrupted by the insertion of the targeting vector, but that the targeted deletion of exons 51-54 had not been achieved (Fig. 2, and Additional file 1: Supplementary material). Instead, in the Dysf tm1Kcam mouse, the neomycin cassette is positioned 3′ of exon 50, followed by an inverted short arm of the targeting vector that contains exon 55 and part of the thymidine kinase cassette. Sequencing also revealed that the neomycin cassette is flanked by two LoxP sites and contains additional copies of a cloning linker; this likely led to the inverted insertion of the short arm into the targeting vector. Downstream of this vector, the genomic locus of dysferlin continues, with exon 48 followed by the remainder of the wild-type locus, including the targeted exons 51-54 (Fig. 2, and Additional file 1: Supplementary material). Importantly, despite the presence of exons 51-54, the homozygous Dysf tm1Kcam mice do not synthesize fulllength dysferlin (Fig. 3): neither an antibody recognizing an N-terminal epitope (Romeo I) nor one recognizing a C-terminal region of the dysferlin protein (NCL-Hamlet) detected full-length dysferlin on Western blots of muscle extracts from homozygous Dysf tm1Kcam mice.
Based on this new sequence information on the dysferlin locus in Dysf tm1Kcam mice, we were able to improve the genotyping PCR by designing primers that reduce the amplicon size from~4 kb to~2 kb (Fig. 4). This also reduces the amplification time from the 3 h used in the most recently published protocol [12] to 1.75 h. The reductions in amplicon size and amplification time led to a  Fig. 4 Novel genotyping PCR of Dysf tm1Kcam . a Schematic drawing of the targeted dysferlin locus in wild type and Dysf tm1Kcam mice, with binding sites of primers used for genotyping shown in pink. The genotyping primers previously described by Han et al. [12] are depicted in blue (#2290, #2581, #4768). b Results of a genotyping PCR using DNA from toe biopsies of homozygous mutant (Dysf tm1Kcam/tm1Kcam ), heterozygous mutant (Dysf tm1Kcam/+ ), and wild type mice, as well as a no template control (NTC) robust and reliable genotyping protocol, with an error rate of about 2 %.
The finding that an insertion in the dysf gene rather than a deletion of several of its exons is responsible for the dysferlin deficiency in the Dysf tm1Kcam mouse strain explains why attempts to improve genotyping based on published information on this locus of the Dysf tm1Kcam mouse [3] have failed. We hypothesize that a homologous recombination event on the long arm led to insertion of the targeting vector, and that the reverse orientation of the short arm prevented the second recombination event that would have been necessary for the deletion of exons 51 to 54.
Despite harboring an insertion rather than a deletion on the genomic level, the Dysf tm1Kcam mouse is a valid model of dysferlin deficiency, given that no full-length dysferlin protein could be detected in homozygous mice using either an N-or a C-terminally directed antibody. Homozygous Dysf tm1Kcam mice show a progressive muscular dystrophy similar to that in the knock-out mouse model generated by Ho et al. [1], and the studies performed with the Dysf tm1Kcam mouse model retain their validity [4,7,5,6,8,9].